Vexilar Cleanova W9 Robot Vacuum Cleaner With Mop Review UK 2026

Key specifications

Suction Power and Cleaning Performance

With an 8000 Pa suction rating, the Cleanova W9 is designed to lift dust, dirt, and pet hair from carpets and from hard floors such as tiles and ceramic. The robot offers three suction modes: Quiet Mode (50 dB), Standard, and Turbo. Turbo is intended for deeply embedded particles, while the lower settings suit everyday debris. The 3-level water adjustment supports mopping on ceramic, wooden floors, and marble, with results depending on the selected water level and floor condition.

Navigation and Mapping

The Cleanova W9 This robot vacuum uses LiDAR for navigation, and it maps the home with "intelligent 360° laser navigation", designed to complete full-home mapping in about 15 minutes. Mapping supports up to 5 floor maps, making it suitable for multi-storey homes. During use, the robot plans efficient routes and detects obstacles with millimetre-level precision, so it can adjust in complex layouts. The app includes room zoning, scheduling and live tracking, alongside no-go zones and virtual walls to help protect sensitive areas. If areas are poorly defined, it may avoid more space than needed.

Battery Life and Run Time

Battery performance is designed to last up to 150 minutes per charge, and it is powered by four 2600mAh batteries. The shark cleanova w9 vexilar w9 robot vacuum cleaner with mop review is set up for whole-house cleaning sessions, as it can auto-dock when the battery falls below 15%, then recharge and resume. This reduces the need for manual intervention on larger floor areas. Cleaning time still depends on the suction mode and floor complexity, and extended jobs may require multiple recharge cycles, so the stated 150 minutes applies mainly to typical conditions.

Mop Function

Mopping on the Vexilar is handled as part of its 3-in-1 vacuum, sweep, and mop system, enabling the robot to clean floors while taking care of dust and debris. In the robot vacuum setup, the robot uses a 2-in-1 water tank and dustbin, allowing vacuuming, sweeping, and mopping simultaneously. It includes 3-level water adjustment and 3-level suction adjustment, so cleaning can be matched to ceramic tiles, wooden floors, and marble without residual water soaking the floor.

Self-Empty and Maintenance

Maintenance for the Vexilar W9 robot vacuum with mop is designed to be manageable, largely because it uses a 2-in-1 water tank and dustbin that supports vacuuming, sweeping, and mopping simultaneously. No self-empty feature or base is described, so the dustbin typically needs to be emptied manually. After use, the water tank should be refilled for mopping, then cleaned to avoid residue. The W9 includes 3-level water and 3-level suction adjustments, which can help reduce buildup on lighter floors, though heavy debris still requires routine checks.

App Control and Smart Features

App control on the robot vacuum W9 is based on the robot's LiDAR navigation and its ability to store up to 5 floor maps, including multi-story setups. In the app, owners can name rooms and set scheduled cleaning. The app also supports custom cleaning routes, live tracking of progress, and up to 15 no-go zones or virtual wall restrictions. Cleaning can be paused and resumed after recharge, which helps coverage on 150-minute runs, although setup requires careful zoning for each floor.

Noise Level

Noise level is a key consideration for any robot vacuum, and the Vexilar Cleanova W9 Vexilar W9 is rated at up to 50 dB in Quiet Mode. The manufacturer labels Quiet Mode as "whisper-quiet", which helps when cleaning during naps or evenings. The unit also offers Standard Mode and Turbo Mode, so noise likely rises as suction increases. A practical approach is to start in Quiet Mode for daily floor runs, then switch to higher modes only when extra pickup is needed.

Pet Hair Performance

Pet hair pickup is a core use case for the Vexilar W9. It is designed to handle dust, dirt, and debris, along with pet hair, across carpets, tiles, and hard floors. Powered by 8000Pa suction, it removes deeply embedded particles in Turbo, and it switches between Quiet (50dB), Standard, and Turbo modes. For practical results, it should run on a mapped route, then repeat high-traffic passes with the higher suction mode. Long hair tangled in heavy pile may still be missed, as this depends on brush action.

Cleaning and Maintenance

Cleaning and maintenance for the robot vacuum W9 are straightforward, but regular care is still required to keep suction and mopping performance consistent. The dustbin should be emptied when it fills, since airflow can drop if debris builds up. The 2-in-1 water tank also needs rinsing after mopping, and the 3-level water setting should be adjusted to the floor dirtiness. Brushes and the mop area should be checked for hair tangles to avoid smearing residue.

Who Is This Robot Vacuum For?

The Vexilar W9 robot vacuum with mop is for households that want automated coverage across multi-room layouts. It uses LiDAR mapping, stores up to 5 floor maps, and supports 15 no-go zones plus app scheduling. With up to 150 minutes of runtime and 8000Pa suction, it is suited to mixed floors including ceramic tiles, wooden floors, and marble. It can vacuum and mop using a 2-in-1 tank, while the overall "is the robot vacuum any good" verdict depends on whether priority is water-assisted cleaning, since stubborn mess may still require spot cleaning.

Where to Buy in the UK

For shoppers in the UK, this robot vacuum W9 robot vacuum with mop may be available through common UK retail and marketplace channels. Check listings with major online retailers such as Amazon UK, John Lewis, Currys, AO, and Argos, alongside home-technology specialists that stock the same LiDAR, 8000Pa suction model and Mop features. To find the best price in the UK, compare current listings and delivery estimates, and confirm what is included in the box and the returns terms, as offers can change quickly.